** This product is currently only available for UK delivery **
Sil-Air L88 replacement motor / pump assembly as fitted to Sil-Air 30 series models.
This is a complete L88 motor unit & is supplied fitted with rubber insulating mounts, control housing containing start relay & overload protector, 1/8" BSP-P male outlet adaptor, also included is 500ml Sincom 32/e lubricant, intake air filter & instruction manual.
Werther Part Number C160807R.
The L88 is the current fit motor for Sil-Air 30 series compressors, it may also be used for earlier 30 series compressors (identified by a flat lid gasket, rather than the current O-ring gasket). The motor inlet & outlet pipes may be located in a different position / orientation on earlier, pre L88 models, this will not cause an issue with compressors that do not have a case, but on those that do have a case it's possible that oil fill access hole cut in the case may not allow access for oil filling - please check by referring to the images.
May be suitable for use with rebranded compressors marketed by Aztek, Aero-pro, Euro-tec, Revell, Rotring & others, again please refer to the images to gauge suitability.
* 25 L/Min (0.88CFM)
* 40 dbA
* 10.8Kg (with oil)
* 170 x 255 x 210mm (WxDxH)
* 220/240V, 50Hz
