With it's pistol trigger offering exceptional control, the Iwata Hi-Line HP-TH is unique in being the first airbrush to offer fan pattern spray as well as the usual round patter spray, the spray pattern can be easily changed by swapping the air cap. Ideal for automotive touch up & custom painting, the Hi-line HP-TH offers unprecedented control of fan pattern spray with the minimum of overspray.
The fan pattern is achieved by additional air outlets on the included fan pattern cap, these compress the traditional round spray pattern into a fan in the same way as automotive spray guns.
* Gravity fed, double action, internal mix airbrush
* 0.5mm nozzle
* Fan pattern & round pattern air caps
* 14ml removable paint cup with lid
* Pistol trigger for comfort & control
* Adjustable trigger tension
* MAC valve for air pressure control
* Solvent resistant needle seal
* Pre-set handle
* 3 to 63mm round or fan spray pattern
* 5 year standard warranty
* 10 year extended UK warranty
** Please see the "Air Requirements" tab for information on compressor suitability.
For parts or operating instruction (PDF, new window);
For parts or operating instruction (PDF, new window);
The HP-TH consumes more air than a standard airbrush when operating in fan pattern & many low / medium powered airbrush compressor will be unable to provide adequate airflow.
The following air consumption figures can be used to determine if you existing compressor will be suitable;
20psi - round pattern - 11.1 L/Min*
30psi - round pattern - 14.6 L/Min*
20psi - fan pattern - 19.1 L/Min*
30psi - fan pattern - 25.2 L/Min*
Your compressors airflow rating should be available from the compressor manual or from the manufacturer's website. Should the rating be provided in CFM, multiply the CFM rating by 28.3 to obtain the L/Min rating.
* These figures are approximate & provided for guidance only
